HA & HAD Height Adjuster

HA & HAD Height Adjusters

Type HA is available in various sizes to suit the small and medium range of Trelleborg Industrial AVS-mountings, as listed in the table. It allows mountings to be retrofitted to existing installations where original spares are unobtainable.

Notes:

  • For optimum solutions where close coupling tolerance are required, allow the mountings to settle for 48 hours before final alignment of the engine installation
  • For securing the bolt into the mounting, is it recommended to apply Loctite.
  • The height adjuster HA can be used together with Novibra type M-Mount. See description of M-Mount

 

 

Contact us for more information.

See table below for standard sizes.

 

Part Number H D E A B C F Washer Hexagon Low Nut Hexagon Flange Nut Lock Nut Plastic Insert Fine Thread Adjusting Unit
HA 12/12 95 M12 M12 20 D.A.F. 8 8 37x12x3 M12 M12 M12
HA 12/16 105 M12 M16 20 D.A.F. 12 10 44X15X3 M16 M16 M16
HA 16/16 110 M16 M16 24 D.A.F. 12 10 50X15X3 M16 M16 M16
HA 16/20 130 M16 M20 24 D.A.F. 12 10 56X20X4 M20 M20 M20
HA 20/20 135 M20 M20 30 D.A.F. 12 10 60X21X4 M20 M20 M20
Part Number H D E A B C F Washer Lock Nut Plastic Insert Fine Thread Adjusting Unit
HAD 12/16 105 M12 M16 D.A.F. 24 20 D.A.F. 12 10 44X15X3 M16 M30X1.5
HAD 16/16 110 M16 M16 D.A.F. 24 24 D.A.F. 12 10 50X15X3 M16 M30X1.5
HAD 16/20 130 M16 M20 D.A.F. 27 24 D.A.F. 12 10 56X20X4 M20 M36 X 2
HAD 20/20 135 M20 M20 D.A.F. 27 30 D.A.F. 12 10 60X21X4 M20 M36 X 2
HAD 24/24 See Drawing